Editor : Ronny @ Feb 2002

Calibrationg procedures for the Mini-X ESC




[ rcMart.com ]

Here are the calibrationg procedures for the Mini-X ESC!!!

1	Turn the throttle trim to the neutral/middle of its adjustable range.
2	Switch Tx and Rx on
3	Leave the Tx alone and press and hold the setup switch of the ESC for 2 to 3 secs until both red and green LED turn On.
4	Release the setup button
5	Set the Tx to moving forwards direction and hold the throttle until the RED
6	Set the Tx to moving backwards direction and hold the throttle until the GREEN LED Turn On

All the materials are the properties of dinball.com.

You are NOT allowed to copy anything from this page without our written permission.