Editor : Ronny @ Feb 2002
Calibrationg procedures for the Mini-X ESC
[ rcMart.com ]
Here are the calibrationg procedures for the Mini-X ESC!!!
| 1 |
Turn the throttle trim to the neutral/middle of its adjustable range. |
| 2 |
Switch Tx and Rx on |
| 3 |
Leave the Tx alone and press and hold the setup switch of the ESC for 2 to 3
secs until both red and green LED turn On. |
| 4 |
Release the setup button |
| 5 |
Set the Tx to moving forwards direction and hold the throttle until the RED |
| 6 |
Set the Tx to moving backwards direction and hold the throttle until the
GREEN LED Turn On |
All the materials are the properties of dinball.com.
You are NOT allowed to copy anything from this page without our written permission.
|
